Samsung GT-P6210 User Manual
Page 147
Settings 143
Add Wi-Fi Network
To open a dialog where you can add a Wi-Fi network by entering
its Network SSID (the name it broadcasts), security type, and
other properties:
1.
From a Home screen, touch
Apps
➔
Settings
➔
Wireless and networks.
2.
Touch Wi-Fi settings, then touch Add Wi-Fi network.
3.
Use the keyboard to enter Network SSID.
4.
Touch the Security field and then touch a security type.
5.
Use the keyboard to enter the Password.
6.
Touch Save.
Wi-Fi Direct Settings
You can configure your device to connect directly with other Wi-Fi
capable devices. This is an easy way to transfer data between
devices. These devices must be enabled for Wi-Fi Direct
communication. This connection is direct and not via a hot spot
or WAP.
Note: Activating this feature will disconnect your current Wi-Fi network
connection.
1.
From a Home screen, touch
Apps
➔
Settings
➔
Wireless and networks
Wi-Fi Direct settings.
2.
Touch Device name and use the keyboard to change your
device’s name.
3.
Touch Wi-Fi Direct.
A check mark displayed next to the feature indicates it is
enabled. Your device will begin to search for other devices
enabled with Wi-Fi direct connections.
4.
After scan, touch a device name to begin the connection
process to another Wi-Fi Direct compatible device.
Note: The target device must also have Wi-Fi Direct service active and
running before it can be detected by your device.
5.
Touch Connect.
The direct connection is then established.
6.
When prompted to complete the connection, touch OK. The
status field now reads “Connected” and your connected
device is listed within the Wi-Fi Direct devices listing.