Samsung GT-P6210 - Manual (Page 11)

Getting Started 7
2. Insert the USB cable into the Charging Head (2).
3. Insert the USB cable into the device’s Charger/Accessory
Port (3).
4. Plug the Charging Head into a standard AC power outlet.
Warning!: While the device is charging, if the touch screen does not function
due to an unstable power supply, unplug the USB power adapter
from the power outlet or unplug the USB cable from the device.
5. When charging is complete, unplug the Charging Head
from the power outlet and remove the USB cable from the
device.
Turning Your Device On and Off
Turning Your Device On
ᮣ Press and hold the Power/Lock Key .
For more information, refer to “Unlocking the Device” on
page 12.
Note: Your device’s internal antenna is located along the top back of the
device. Do not block the antenna; doing so may affect signal quality
and may cause the device to operate at a higher power level than is
necessary. For more information, refer to “GPS Applications” on
page 113.
Correct
Incorrect
Charger/Accessory
Port