Samsung NC10 - Manual

3-1
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
NC10
3. Disassembly and Reassembly
3-1. NC10 Disassembly and assembly
Part Picture Description
Main
System
1
2
1
1. Before disassembling the system, the AC adapter and the
battery have to be separated.
2. As shown in picture 1, adhere KNOB to the end closely
into the arrow direction, then push the battery up as shown
in picture 2.
3. When the battery is pushed upwards, it can be separated.
4. Remove the BOTTOM screw.
IF only keboard is disassembled, remove only 3 BOTTOM
screws(ㅁ mark).
M2 x L8, Silver (15EA)
5. Remove the DOOR-MEMORY.
[Caution] Attention to red sentence.
Winchester_NC10_Eng.indb 1 2008-09-20 오후 1:36:02