Symbol Technologies SPT 1500 - Manual (Page 25)

1-7
Getting Started with the SPT 1500
After you tap each of the targets, continue with the following sections to set the time and
date.To recalibrate after initial calibration:
1. Select the Prefs Icon
2. Tap in the right-top corner
3. Select Digitizer
About the Backlight Feature
If you have difficulty seeing the information on your SPT 1500 terminal, you can use the
backlight feature to illuminate your screen.
To activate the backlight feature, press the green power button and hold it down for about
two seconds. Release the button when the backlight turns on.
To turn off the backlight feature, press and hold the green power button for about two
seconds. The backlight feature also turns off automatically (after a period of inactivity) with
the Auto-off after feature.
In addition, you can use a full-screen pen stroke to activate the backlight feature. See Buttons
Preferences on page 11-2 for more information.
Setting the Time
The General Preferences screen is the first screen to appear after you align the digitizer on
your SPT 1500 terminal.
Note: If the General Preferences screen is not on your SPT 1500 terminal screen, you
may have pressed one of the application buttons on the front panel. See