Symbol Technologies SPT 1500 - Manual (Page 206)

14-4
SPT 1500 Product Reference Guide
t Scan Angle: defines the scan angle to be used by the scanner; wide angle or narrow
angle.
Code Format Setup:
t Code ID Char: defines the CodeID Character. The options are None, AIM and
Symbol.
t Tx Format: defines the data transmission format.
t Prefix/Suffix: defines the Prefix and Suffix values.
Beep
This menu option allows you to customize the Frequency, Duration and Pattern of the
scanner’s beep.
Options
This menu option allows you to reset Defaults, change the data display preferences, and view
the About Scan Demo screen.
Scanning Bar Codes using Demo Scan
To scan bar codes using the Demo Scan application:
1. Select the Demo Scan application icon from your main application screen.
The Symbol Scanner Demo screen appears.
2. If desired, customize your scanner’s features by selecting from the various options as
described in the previous paragraphs.
3. Aim the scanner at the bar code.
4. Press either the right or left scan trigger or tap the Scan Button. Make sure the red
scan beam covers the entire bar code. The green scan LED lights and an audible beep
sounds to indicate a successful decode.
Figure 14-1. Scanning with the SPT 1500