Symbol Technologies SPT 1500 - Manual (Page 234)

17-4
SPT 1500 Product Reference Guide
Performing a Hard Reset
A hard reset also tells your SPT 1500 terminal to start over again. With a hard reset all
records and entries stored in your SPT 1500 terminal are erased. Therefore, never perform a
hard reset unless a soft reset does not solve your problem.
Note: You can restore any data previously synchronized with your computer
during the next HotSync operation.
To perform a hard reset:
1. Hold down the green power button on the front panel of the SPT 1500 terminal.
2. While holding down the power button, use the tip of an unfolded paper clip (or
similar object without a sharp tip) to gently press the reset button.
3. When a message appears on the SPT 1500 terminal screen warning that you are
about to erase all the data stored on your SPT 1500 terminal, do one of the
following:
s Press the upper half of the scroll button on the front panel of the SPT 1500
terminal to complete the hard reset and display the Digitizer screen.
s Press any other button to perform a soft reset.
Note: With a hard reset, the current date and time are retained. Formats
Preferences and other settings are restored to their factory default
settings.
Reset button