Symbol Technologies SPT 1500 - Manual (Page 22)

1-4
SPT 1500 Product Reference Guide
Installing the Batteries
To use your SPT 1500 terminal, you must install two AAA alkaline batteries. The batteries
fit behind the battery door on the back of the SPT 1500 terminal.
To install the batteries in your SPT 1500:
1. Press the latch on the battery door and lift the battery door away from the SPT 1500
terminal.
2. Install the two AAA alkaline batteries into the battery compartment.
IR port Uses infrared technology to transmit data to and receive data
from other SPT 1500 terminals and other Palm Computing®
devices. See Beaming Information to Other SPT 1500
Terminals on page 2-27 for more information.
Reset button Under normal use, you should never have to use the reset
button. See Resetting Your SPT 1500 Terminal on page 17-
3for information about how to use the reset button.
Contrast
control Adjusts the appearance of the screen for the clearest screen
display. Depending on the lighting conditions or temperature
of the environment where you use your SPT 1500 terminal,
you may need to adjust the setting of the contrast control.
Battery door Covers the batteries that power your SPT 1500 terminal. See
Installing the Batteries for information on removing the
battery door and installing batteries.
Serial port
door Protects the serial port that fits into the connector of the SPT
1500 terminal cradle to ensure that the connection surface of
the serial port remains clean and clear of debris.
Press tab to
open