Symbol Technologies SPT 1500 - Manual (Page 178)

11-18
SPT 1500 Product Reference Guide
Note: If you are not sure, try PPP; if that doesn’t work, ask your Internet
Service Provider or your System Administrator for the correct
connection type.
Idle Timeout
The Idle Timeout setting defines how long your SPT 1500 terminal waits before dropping the
connection with your ISP or dial-in server when you switch out of a TCP/IP application.
To set the Idle Timeout:
1. Tap the Idle Timeout pick list and select one of the following options:
2. Tap the OK button to confirm your selection and return to the Network Preferences
screen.
CSLIP Compressed Serial Line Internet Protocol
Immediate Your SPT 1500 terminal drops the
connection to your ISP immediately when
you switch to another application.
1 minute Your SPT 1500 terminal waits one minute
for you to open another application before it
drops the connection.
2 minutes Your SPT 1500 terminal waits two minutes
for you to open another application before it
drops the connection.
3 minutes Your SPT 1500 terminal waits three minutes
for you to open another application before it
drops the connection.
Power Off Your SPT 1500 terminal keeps your PPP or
SLIP connection until you power off your
SPT 1500 terminal (or until it times out).
This option works best with the PalmPilot
Modem.