Symbol Technologies SPT 1500 - Manual (Page 120)

8-10
SPT 1500 Product Reference Guide
Preparing Your SPT 1500 Terminal for a Modem
HotSync Operation
To prepare your SPT 1500 terminal for a modem HotSync operation:
1. Turn on your SPT 1500 terminal and tap the icon to open the Applications
Launcher.
2. Tap the icon to open the HotSync screen.
3. Tap the Enter Phone # box under the Modem Sync icon to open the Phone Setup
dialog.
Note: If you have Network HotSync software installed on your SPT 1500
terminal, the Remote Setup dialog appears instead. See “Network
Preferences” for more information.
4. Enter the telephone number to access the modem connected to your computer.
5. If needed, enter a dial prefix (such as “9”) to access an outside line, and then tap the
Dial Prefix check box.
Tip:You can enter a comma in the field to introduce a “pause” in the dialing
sequence.
6. If the phone line you’re using for the SPT 1500 terminal has “Call Waiting,” select
the Disable call waiting check box to avoid an interruption during the modem
HotSync operation.
7. If you want to use a calling card to place the call, select the check box and enter the
calling card number.
8. Tap OK to return to the HotSync dialog.