Generate report – GE XLG3 User Manual
Page 81
72
Chapter 5 Capturing Images and Videos
GE Inspection Technologies XLG3 VideoProbe System
Generate Report
A report can be created once an inspection has been completed and stopped.
1.
Press the
MENU > Menu Directed Inspection > Generate Report.
2.
Select the Drive Containing the Inspection: Select with the Joystick and
press
ENTER to confirm.
3.
Locate the Inspection: Inspections are filed in the location specified in the first text
entry box at the beginning of the inspection.
4.
Select the Inspection: Use the Joystick to select the correct folder. Press
the
ENTER button to accept.
5.
Generate Report: Press
ENTER to finalize the report.
Note
•
Reports can not be edited from the XLG3™ VideoProbe
®
unit.
•
Generated reports can not contain more than 200 images.
•
Reports with more than 150 images will increase the amount of time the
XLG3™ VideoProbe
®
requires to generate. May take in excess of
5 minutes.
•
Reports are unable to open images not created using the
XLG3™ VideoProbe
®
.