Reviewing settings for measurement – GE XLG3 User Manual
Page 50
User Manual
Chapter 4 Setting Up the Software
41
Reviewing Settings for Measurement
For XLG3 systems equipped with measurement capability, these settings determine
system behavior when you are taking measurements. For details, see
“Measuring
Features and Defects”
on page 89.
To Review Settings for Measurement
1.
Press .
2.
Select Setup Menu > Measure.
3.
Change any desired settings.
Item
Description
Stereo
The Cal Info option displays calibration data for the selected stereo tip. All other options
are for factory-authorized personnel only.
Shadow
The Cal Info option displays calibration data for the selected shadow tip. All other
options are for factory-authorized personnel only.
Units
Inches, mm. Determines which units are displayed.
Set Min Index
Accuracy index’s minimum value. If the index drops below this value, it flashes.
Index Display
On, off. Determines whether the accuracy index is displayed.
User Prompts
On, off. Determines whether user prompts are displayed in measurement mode.
Only trained professionals should turn these prompts off.