GE XLG3 - Manual (Page 120)

8
111
Maintenance
Inspecting and Cleaning the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Checking and Replacing the Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Maintaining the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Replacing the Internal Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Inspecting and Cleaning the System
Inspect and clean the XLG3 system before and after each use. If using the system in a
dirty environment, clean the components more frequently as needed.
If images are distorted or blurred within normal range, and if the optical tip is securely
threaded, the most likely problem is dirty optical surfaces. For best image quality, clean
the optical tip and camera head frequently.
If you discover conditions that require evaluation or repair, return the system to
GE Inspection Technologies. Early repair of minor conditions can prevent much more
costly repair.
To Inspect and Clean an Optical Tip
1. Check the optical tip for damage or contamination.
2. Clean all parts of the optical tip. Use glass cleaner or 70% alcohol-to-water solution
and a pointed cotton swab.
Caution Do not immerse or soak the handset or the probe power plug.