beautypg.com

GE 51144 Keychain Remote Control User Manual

User's manual, Keychain remote control

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Keychain Remote Control

Smart Remote Plus Transmitter

I

User's Manual

Enclosed you will find

•(1) Keychain Remote Control
•12VA23 Battery (installed)

The GE SmartRemote

Plus™ advantage

Any transmitter in the 6E Smart Remote Plus

product line is capable of controlling every
receiver—the ultimate in home convenience.
Control any number of light fixtures or
appliances from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.

Questions?
Call 1-800-443-4924

or visit us at

www.GESmartHome.com

\m

(D

E

V)
Ui
0

The following GE Smart Remote Plus receivers (sold separately) can be controlled by THIS transmitter;

Q

3

Indoor Outlet Outdoor Outlet Socket Adapter

Wall Switch

Garage Adapter Dimmer Switch

RFWORXPS RF106RXPS RFW4RXPS RF102RXPS COMING SOONI COMING SOON!

The receivers above can also be controlled by the following GE Smart Remote Plirs transmitters (sold separately);

o

aaa

aaa

aaa

a o o

Key Chain Remote Wall Mount Control Whole-Home Control Motion-Sensing Control Garage Control

RFIOOTXPS RFI02TXPS RF2000KINPS

RF6I3TX COMING SOON!

IMPORTANT! These devices are NOT compatible with devices from other systems.

You must purchase Smart Remote Plus transmitters and receivers to ensure compatibility.

To extend the range of the
transmitters and receivers

in your system, use the
GE Smart Remote Plus
Range Extender

(sold separately).

Range Extender

RFIOORXTX

art RainntR Plus

Expanding your system

The GE Smart Remote Plus devices operate on any of 8 user-settable channels. The channels are

easy to set/adjust-with the simple turn of a knob. Setup your GE SmartHome™ by purchasing as
many transmitters and receivers as you need. The following ta ble is just one example of how you
can configure your Smart Remote Plus system:

Area

CH Transmitters

Receivers

Bedroom

1

Bedside-Wall Mount Control
Entrance-Wall Mount Control

(2) Bedside Lamps - (2) Socket Adapters

Corner Torchiere - Indoor Outlet Adapter
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter

Living Room

2

Coffee Table - Timer/Controller

Entrance-Wall Mount Control

(2) End Table Lamps - (2) Socket Adapters

Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Christmas Tree - Indoor Outlet Adapter

3

Window Santa - Indoor Outlet Adapter

Lighted Poinsettia - Indoor Outlet Adapter

Basement

4

Entrance-Wall Mount Control

(4) Overhead Can Rxtures - (4) Socket Adapters
(2) Fluorescent Fixtures - (2) Indoor Outlet Adapters

Garage

5

Entrance-Wall Mount Control

(2) Ruorescent Fixtures - (2) Outdoor Outlet Adapters

Overhead Light Fixture - Wall Switch

Outdoor

6

Foyer-Wall Mount Control

Car Keys - Key Chain Remote

Entry Light-Wall Switch
Coach Lantern-Wall Switch

7

Christmas Lights - Outdoor Outlet Adapter

Yard Santa - Outdoor OutletAdapter

Kitchen

8

Entrance - Wall Mount Control

Coffee Maker - Indoor OutletAdapter

Operating Instructions

1. Remove the battery compartment cover.

2. Set the HOUSE CODE to any one of the following settings:

z

HP

n

0(3]^

A B C D

NOTE: Make sure ALL your GE Smart Remote Plus devices have the same HOUSE CODE setting. The

transmitters WILL NOT control the receivers if they have different HOUSE CODE settings.

IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on / off).

If you experience interference, change the HOUSE CODE on all your GE Smart Remote Plus

transmitters and receivers to a different setting.

3. Replace the battery compartment cover.

4. Set the CHANNEL by using the knob on front as shown.

NOTE: If you set your Key Chain Remote Control to CHANNEL 1, the unit can control any receiver set

to CHANNEL 1. If you set your Key Chain Remote Control to CHANNEL 2, the unit can control any

receiver set to CHANNEL 2... and so on.

IMPORTANT! A transmitter will control a receiver ONLY if they have the same

HOUSE CODE and CHANNEL settings.

5. Use the toggle button to activate the Key Chain Remote Control (ON/OFF operation). Make

sure to press firmly and for a minimum of 1 second for best results. An indicator lights RED

when a signal is sent

6. Using any of the receivers set to the same CHANNEL and HOUSE CODE, test the installation by

using the ON and OFF buttons.

If your unit does network properly or if you want additional assistance, please call 1-800-443-4924.

We would be happy to answer ALL of your questions. Visit us on the web atwww.GESmartHome.com

to download application notes, manuals and to find out more about the GE SmartHome™ product line!

Specifications

Battery Type..................................................................... Use 0NLYA23 (12V) Alkaline

NOTE: The functional range will decrease as the battery wears out so make sure to replace the battery
every 6 months for best results.

*Functional range may be adversely affected by one or more of the following factors: weather, radio

frequency interference, low transmitter battery and obstructions between the transmitter and receiver.

This device complies with Part 15 of the FCC rules. Operation is subjectto the following two conditions:

1. This device may not cause harmful interference, and;

2. This device must accept any interference received, including interference that may cause

undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Made in China for GE Home Electric Products, Inc.
Nela Park, Cleveland, OH 44112
Desc.: RFIOOTXPS

Table of contents