GE XLG3 User Manual
Page 75
66
Chapter 5 Capturing Images and Videos
GE Inspection Technologies XLG3 VideoProbe System
To Quick-Record, Bypassing Menus
Press and hold
.
A flashing red dot appears. As long as this dot is flashing, the system is recording. If using
a DVD, recording starts only after the DVD drive light stops flashing. If you start recording
to a new DVD that has not been initialized manually, the system automatically initializes it
before recording. See “Initializing DVDs” on page 64.
To Pause Recording
1.
Press
quickly.
- or -
Press .
Select
Video Record > Pause.
Recording stops temporarily. The pause symbol appears:
2.
When ready to resume, press
again.
- or -
Press .
Select
Video Record > Resume Recording.
The red dot flashes again. Recording resumes.
To Stop Recording
Press and hold
.
-or-
Press .
Select
Video Record > Stop.
Note
Each time you pause and then resume video recording, the system continues
saving to the same MPEG file. If you are recording to a DVD, the first pause or
stop takes about a minute to process. The total number of times you can pause
and stop varies with DVD type. See
“DVD Types Accepted”
on page 64.
Note
Each time you stop recording, the system creates a separate MPEG file. If you are
recording to a DVD, the first pause or stop takes about a minute to process. The
total number of times you can pause and stop varies with DVD type. See
“DVD
Types Accepted”
on page 64.