Correcting wide-angle distortion – GE XLG3 User Manual
Page 63
54
Chapter 5 Capturing Images and Videos
GE Inspection Technologies XLG3 VideoProbe System
Correcting Wide-Angle Distortion
Distortion correction is part of the optional image processing package. (See
“About the
Image Processing Package”
on page 4.)
When you use an optical tip with a 120° field of view, the image edges are distorted.
You can improve such images by turning on distortion correction.
To Turn On Distortion Correction
1.
While viewing a live image with a 120° optical tip installed, press
.
2.
Select Image > Distortion Correction > 120 Deg.
To Turn Off Distortion Correction
1.
Press .
2.
Select Image > Distortion Correction > Off.
Note
120 Deg annotation on image is saved with the image.
Note
If you enter a measurement mode, a corrected image reverts to its
uncorrected state for accuracy.
120° optical tip,
distortion correction on
120° optical tip,
distortion correction off