Power-on desktop/csl, Power-on desktop/csl -25 – StorageTek 9840 User Manual

Page 75

95741

Sixth Edition

3-25

Desktop Units

Power-On Desktop/CSL

Use the instructions below to power-on the 9840 desktop drive or the CSL:

Note: Ensure the female end of the power cord is plugged into the drive/CSL.

1. Attach the male end of the power cord to a power outlet.

2. Press the power switch on the 9840 Tape Drive/CSL.

1. Desktop drive
2. CSL
3. Power switch
4. Power cord

Note: The desktop drive and CSL shown above use a SCSI interface to the host.

3. Verify that the 9840 Tape Drive powers on.

Note: A steady asterisk on the operator panel indicates a successful IPL completion, the

drive is online, but not loaded with a cartridge.

4. Proceed to

C53821