StorageTek 9840 - Manual (Page 37)

95741 Sixth Edition 1-13
Operator Panels
CSL Operator Panel
The CSL operator panel ( Figure 1-13 ) allows a human interface to the
subsystem. When the 9840 Tape Drive is installed in a CSL, the 9840 Tape Drive
front operator panel switches and indicators are replicated on the left side of
the CSL front panel.
Note: See “Standard Operator Panel” on page 1-8 for tape drive specific switch
usage and indicator information.
The right side of the CSL front panel contains the switches and indicators
specifically for the CSL operation.
Note: See Chapter 5, “Cartridge Scratch Loader,” for CSL specific switch usage
and indicator information.
Figure 1-13. CSL Operator Panel
1. power indicator
2. activity indicator
3. clean indicator
4. service indicator
5. IPL switch
6. operator indicator
7. system indicator
8. automatic indicator
9. manual indicator
10. Unload switch
11. Menu switch
12. Select switch
13. Operator display
14.
Start switch
15. Autoload Mode switch
Note: The IPL switch (5) initiates IPL for the drive only. The Power switch on the back of
the CSL initiates IPL for the CSL and the drive.
C53660
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15