Csl in automatic mode, Csl in automatic mode -21, Figure 5-15. priority mount cartridge -21 – StorageTek 9840 User Manual

Page 137: Figure 5-15

95741

Sixth Edition

5-21

Modes of Operation

Note: If the cartridge is not inserted into the CSL feed channel properly

(

Figure 5-15

), the CSL cannot insert the cartridge into the drive slot.

3. Check to ensure the

operator

indicator is flashing.

4. Press the

Start

switch to feed the cartridge into the drive and to clear the

flashing

operator

indicator.

CSL in Automatic Mode

The automatic mode is used for sequential mounting of cartridges from the
input bin into the drive. When the CSL is in the automatic mode and the drive is
not loaded, follow these procedures to load a priority cartridge:

1. If there are no cartridges in the input bin, the

operator

indicator flashes to

signal you to insert a priority (single) cartridge into the feed channel. Press
the

Start

switch to resume CSL operation.

2. If the input bin is not empty, the mode must be changed to manual mode to

mount the priority cartridge. This prevents the next cartridge from being
automatically loaded.

Note: Refer to

Figure 5-15

to correctly load a cartridge into the feed channel

Figure 5-15. Priority Mount Cartridge

1. Cartridge
2. First index rod
3. Cartridge stop mechanism

C53665