Sanyo DSR-3706PA - Manual (Page 9)

English
Foreword 8
Names and functions of parts (front panel)
DSR-3706PA
1 Power indicator (POWER)
On: The power cord at the rear panel of the DVR is
inserted in the outlet.
Off: The power cord on the rear panel of the DVR is not
inserted in the outlet.
Fast blinking: Hard disk error.
Slow blinking: Cooling fan error.
If the indicator is blinking, contact the store where you
purchased the DVR.
2 Remaining capacity warning indicator (FULL) (P46)
(Normal recording area)
On: When recording on the hard disk has become
impossible.
Blinking: The available hard disk space has dropped
below the specified level.
Off: The available disk space is reset by initialization or by
allowing overwrite.
3 Remaining alarm capacity warning indicator (ALARM
FULL ) (P46) (Alarm recording area)
On: When recording on the hard disk has become
impossible.
Blinking: The available hard disk space has dropped
below the specified level.
Off: The available disk space is reset by initialization or by
allowing overwrite.
4 Lock indicator (LOCK) (P66) (Security lock)
On: The operation has been locked using the security
lock.
Off: The password of a valid administrator is entered to
release the lock (a buzzer will sound).
5 Alarm indicator (ALARM)
On: Pre-alarm recording.
Blinking: Alarm recording.
6 Audio output terminal (AUDIO OUT)
The audio output is the same as that of the rear panel
AUDIO OUT terminal.
7 Video output terminal (VIDEO OUT)
The video output is the same as that of the rear panel
MAIN MONITOR OUT terminal.
8 USB terminal (USB)
This terminal connects to an optional CD-R/RW drive.
When the front panel and the rear panel terminals are
connected simultaneously, the front panel is given priority.
9 Camera selection buttons and indicators
On: The camera is selected, or in multi-screen mode, the
indicator is on for each selected camera.
Blinking: Video-loss or an alarm detected.
When "K" is displayed in the upper right corner of the
screen a value can be input. (P33)
F Quad-screen display button and indicator (QUAD)
(P20)
On: Quad-screen display.
Off: Other operation is selected.
G Monitor 2 button and indicator (MON 2) (P16)
On: Monitor 2 operation.
Off: Other operation is selected.
H Plus screen button and indicator (PLUS) (P15)
On: Enlarges and displays the image of one camera only
in the top left corner of the screen.
Off: Pressing the PLUS button again will display the
previous screen.
I Multi-screen button and indicator (MULTI) (P20)
On: Multi-6 screen display.
Off: Other operation is selected.
1
6
7
8
9 F G H I
2 3 4 5