Sanyo DSR-3706PA - Manual (Page 63)

English
How to set 62
General settings
Menu configuration
ALARM : OFF
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
DATE : ON
TIME : ON
QUALITY : ON
AUDIO : ON
ALARM COUNT : ON
ALARM TYPE : ON
TITLE : ON
VIDEO LOSS : ON
LEVEL PASSWORD(4-8) USE
ADMIN -------- OFF
USER -------- OFF
REC CONTROL : ADMIN
DISK1 : 82GB
DISK2 : ---GB
DISK INITIALIZE ->
CAUTION : ALL RECORDING WILL BE ERASED!
MIRRORING : OFF
PLAYBACK DRIVE : ***
CAUTION : RECORDING SPEED WILL BE
LIMITED BY MIRRORING!
NETWORK CONTROL : OFF
NETWORK STATUS : ON
IP ADDRESS : 192.168. 0. 1
SUBNET MASK : 255.255.255. 0
GATEWAY : 0. 0. 0. 0
PORT : 00080
ID PASSWORD (4-8)
ID1 : 1111----
ID2 : 2222----
ID3 : 3333----
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 000
1.DISPLAY SET ->
2.BUZZER SET ->
3.SECURITY LOCK SET ->
4.HDD SET ->
5.NETWORK SET ->
6.RS-485 SET ->
MOVE:JOG SELECT:SHUTTLE
b Displaying the general settings screen
1 Press the MENU button and use the
J-dial to select "3. GENERAL SET",
and then turn the S-dial clockwise.
The screen appears.
2 Turn the J-dial, select the desired
submenu, and turn the S-dial
clockwise.
The selected screen (A~G) is
displayed. Refer to the appropriate
pages for the settings.
(S)
(J)
MENU
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
(S)
(J)
A Data display settings/VIDEO LOSS settings (P63)
B Buzzer settings (P64)
C Security lock settings (P65)
D Hard disk settings (P68)
E Network settings (P69)
F RS-485 settings (P70)