Sanyo DSR-3706PA - Manual (Page 56)

English
Recording settings
55 How to set
The following settings can be performed under the alarm recording settings.
Alarm recording (P56)
These settings control the picture quality, audio recording
and recording rate for the alarm recording area, when an
alarm is detected.
Pre-alarm recording (P57)
These settings control the recording rate and the
duration for pre-alarm recording.
Alarm trigger (P57)
Selects the alarm detection method.
Motion sensor (P58)
1 ALARM RECORDING
Turns alarm recording ON or OFF, and whether alarm recording
should be performed during timer-controlled recording.
When "OFF" is selected, no other settings can be set.
Selections:
OFF: Alarm recording is not performed.
ENABLED:
Alarm recording is performed, regardless of timer-controlled
settings.
AL-REC ON TIMER:
Alarm recording is performed only during timer-controlled
recording.
AL-REC OFF TIMER:
Alarm recording is performed only when timer-controlled
recording is not.
OLY AL-RC ON TMR:
Alarm recording is performed only during the period specified
by the timer setting. If this setting is selected, timer-controlled
recording, and the TIMER button will be disabled.
2 PICTURE QUALITY
Select the picture quality of the recordings.
Selections:
BASIC/NORMAL/ENHANCED/FINE/SUPER FINE
3 AUDIO RECORDING
Audio recording can be switched ON or OFF.
Audio recording can only be set if the recording rate is in the
range of 25~1 FPS. When audio recording is selected, an "A" is
displayed in front of the recording rate. Since both audio and
video will be stored in the alarm recording area, the number of
images that can be recorded is reduced.
If the recording rate is out of this range, audio recording will not be
performed; even if audio recording was set.
4 ALARM INTERLEAVE (recording pattern)
Selections:
ONLY: Records only the live video where the alarm occurred.
SW:
Alternately records the live video from the camera where
the alarm occurred and the live video from all connected
cameras.
5 REC RATE
The following settings can be selected:
Selections:
25, 16.67, 12.5, 8.333 ,6.25, 5, 4.167, 3.571, 3.125, 2.778, 2.5,
2.273, 1.923, 1.667, 1.471, 1.316, 1.19, 1.087, 1, 0.5, 0.333, 0.25,
0.2, 0.1, 0.05, 0.033
Audio recording can only be set when this setting is within the
range of 25~1 FPS.
6 DURATION
Selects the recording duration for a single alarm event from the
following selections:
5SEC/10/20/40/1MIN/2/3/4/5/10/15/CC
CC: Recording is performed as long as the alarm is present
(minimum 5 sec).
7 PRE-ALARM RECORDING
OFF: Pre-alarm recording is not performed.
ON: Pre-alarm recording is performed.
8 REC RATE
Refer to the pre-alarm recording time under recording rate
settings. (P85)
9 DURATION
Refer to pre-alarm recording time. (P85)
F ALARMS CAN BE RECORDED (number of alarms that
can be recorded)
G ALARM TRIGGER
Selects the alarm detection method from the followings:
Selections:
ALARM:
Performs alarm recording when an external alarm is detected.
SENSOR:
Performs alarm recording when a motion sensor detects
movement. (P59)
ALARM AND SENSOR:
Performs alarm recording when an external alarm and a
motion sensor alarm are detected simultaneously.
ALARM OR SENSOR:
Performs alarm recording when either an external alarm or a
motion sensor alarm is detected.
H MOTION SENSOR
Displays the motion sensor setting screen.
G Alarm recording settings menu description
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: **** FPS, DURATION: ****
=> (01731 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
1
3
5
8
G
2
6
9
4
7
F
H
G-1
G-2
G-3
G-1 G-4