Recording settings – Sanyo DSR-3706PA User Manual
Page 55
English
Recording settings
How to set
54
1
Connect an external timer device to the EXT TIMER
IN terminal on the rear panel (Figure 1).
2
Display the
"Displaying the recording settings screen". (P39)
3
Set the timer-controlled recording.
Example:
• PROGRAM: Do not set (OFF).
• FPS: Set 5 FPS.
• SET: Set ON.
1
Turn the J-dial to select "EXT", and then turn the
S-dial twice clockwise.
The "12.5" under FPS starts blinking.
2
Turn the J-dial, select "5", and turn the S-dial
clockwise.
The "OFF" indicator under SET starts blinking.
3
Turn the J-dial, select "ON", and turn the S-dial
clockwise.
4
Press the EXIT/OSD button.
5
Press the TIMER button.
The TIMER indicator turns on, and the timer-controlled
recording goes into standby mode.
• Stopping a timer-controlled recording in
progress
Press the TIMER button. The recording stops, the
TIMER indicator turns off.
• Playback during timer-controlled recording (P18)
b Setting a program for timer-controlled recording
Perform the following settings to set a program after setting
the timer-controlled recording.
Example:
1
Turn the J-dial to select the desired PROGRAM
(P-1), and then turn the S-dial clockwise.
Since the program settings already include the
recording rate, the FPS setting will show "****".
Selections: P-1/P-2/P-3/P-4
2
Turn the J-dial, select "ON" under SET, and turn the
S-dial clockwise.
3
Press the EXIT/OSD button.
F-3
External timer-controlled (alarm) recording
MENU
(J)
(S)
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 12.5 FPS OFF
MON --:-- --:-- OFF 12.5 FPS OFF
TUE --:-- --:-- OFF 12.5 FPS OFF
WED --:-- --:-- OFF 12.5 FPS OFF
THU --:-- --:-- OFF 12.5 FPS OFF
FRI --:-- --:-- OFF 12.5 FPS OFF
SAT --:-- --:-- OFF 12.5 FPS OFF
DLY --:-- --:-- OFF 12.5 FPS OFF
EXT ***** ***** OFF 12.5 FPS OFF
6.TIMER SET
2.RECORD SET
EXT
***** ***** OFF 5 FPS ON
EXIT/OSD
TIMER
EXT
***** ***** P-1 **** FPS ON
EXIT/OSD
Figure 1