Initial settings – Sanyo DSR-3706PA User Manual
Page 38
English
Initial settings
37
How to set
The time period setting allows for using different
settings, such as automatic scrolling, masking, motion
sensor detection settings for four periods of the day (for
example: early morning, morning, daytime and evening).
There are two timers (A and B) that can be set to control
time periods as shown below, allowing for a wide variety
of settings to suit every surveillance need.
Example: Time period A
• 6:30 – 11:30
Automatic screen scrolling
• 11:30 – 13:30
Mask setting for unnecessary areas
• 13:30 – 18:30
Automatic screen scrolling
• 18:30 – 6:30
Motion sensor setting
1
Display the
The
2
Set the timing for TIME PERIOD A.
Example:
T-1: 6:30am, T-2: 11:30am, T-3: 1:30pm, T-4: 6:30pm
1
Turn the S-dial clockwise.
The first "00" of "T-1" starts blinking.
2
Turn the J-dial to select "06" under T-1, and then
turn the S-dial clockwise.
3
Turn the J-dial to select "30" under T-1, and then
turn the S-dial clockwise.
Repeat the same procedure through T-4 to set the
timing of the periods.
3
Set the timing for TIME PERIOD B.
Example:
T-1: 7:30am, T-2: 10:30am, T-3: 2:30pm, T-4: 7:30pm
1
Turn the S-dial clockwise.
The first "00" of "T-1" starts blinking.
2
Turn the J-dial to select "07" under T-1, and then
turn the S-dial clockwise.
3
Turn the J-dial to select "30" under T-1, and then
turn the S-dial clockwise.
Repeat the same procedure through T-4 to set the
timing of the periods, and then turn the S-dial
clockwise.
When time setting is accepted, the cursor moves to
the automatic scrolling (SEQUENCE).
E
Time period setting
06
01
02
03
01
02
03
04
04
05
06
05
06
06
01
02
03
0
01
MENU
(J)
(S)
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
5.TIME PERIOD SET
1.INITIAL SET
TIME PERIOD A 06:30 11:30 13:30 18:30
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 07:30 10:30 14:30 19:30
TIME PERIOD B 00:00 00:00 00:00 00:00