Sanyo DSR-3706PA - Manual (Page 22)

English
21 How to use
Video stored in the normal recording area, alarm recording area or archive area can be located by searching and then played
back.
Use one of the five search methods to locate the required video.
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
NO DATE TIME CH TOTAL ALARMS
0016 05-01 09:53 1 00016
0015 05-01 09:53 1
0014 05-01 09:53 1
0013 05-01 09:53 1
0012 05-01 09:52 1
0011 05-01 09:51 1
0010 05-01 09:51 1
0009 05-01 03:10 1
MOVE:JOG SELECT:SHUTTLE
RECORDING TOP : 16-01-06 14:46
RECORDING END : 19-01-06 13:32
CHANNEL : --
SEARCH :
DATE TIME
16-01-06 14:46
PREVIEW ->
VIEW ->
CHANGE:JOG SET:SHUTTLE
NO DATE START CH CAPACITY
0001 01-01 01:48 1 TOTAL - 816MB
0002 05-01 09:53 1 USED - 16MB
0003 01-01 02:41 1
0004 02-01 03:10 1
0005 02-01 04:25 1
0006 04-01 02:40 1
0007 04-01 01:25 1
0008 04-01 01:25 1
MOVE:JOG SELECT:SHUTTLE
SEARCH FROM : ALARM
START : 01-01-06 00:40
END : 05-01-06 10:17
CHANNEL : --
START PREVIEW ->
MOVE:JOG SELECT:SHUTTLE
SEARCH FROM : ALARM / CHANNEL : 4
START :
05-01-06 10:00
END :
05-01-06 10:17
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
0011 0011 0011
0016 0016 0015 0015 0014 0014
0013 0013 0012 0012
0010 0010 0009 0009 0008 0008
0016 0015 0014
0013 0012
0010 0009 0008
SEARCH
Press the SEARCH button:
The
Searching is not possible
during playback and menu
display.
Note: During playback of video, the S-dial,
the J-dial and the front panel
buttons can be used for operations
such as pause and fast-forward.
A Alarm search (P22)
Searches and plays alarm video from the
recording list based on date and time.
Searches and plays all video stored in the alarm
recording area. If pre-alarm video was also
recorded, then the video immediately before the
alarm can be viewed, too.
B Alarm thumbnail search (P22)
Searches and plays alarm video from the
thumbnail list based on alarm number.
The videos recorded in the alarm recording area
are displayed in the thumbnail list.
C Date/time search (P23)
Searches the recorded video period based on
date and time.
Video stored in the normal recording area (by
normal recording or timer-controlled recording)
and in the alarm recording area can be played
back by specifying the date and time.
D Archive area search (P24)
Searches and plays back video stored in the
archive recording area based on date and time.
E Motion detection search (P24)
Retrieves and plays the images that were
detected by the motion sensor and recorded on
the specified area, channel or at the specified
time.
J (jog) dial S (shuttle) dial
Searching for recorded video