JVC KY-F70B - Manual (Page 64)

E60
Function/variable range
Used to select the image range to be displayed on the
monitor in the VGA mode.
NARROW
: About 94% of the entire image’s vertical
and horizontal range is displayed.
FULL : Almost 100% of the entire image is displayed.
Used to set the level of the colour bar signal output from
the MONITOR terminal of this unit.
0.7V:
outputs 0.7V colour bar signals
0.58V: outputs 0.58V colour bar signals
It is possible to change the output signals to the MONI-
TOR terminal to negative signals.
ON:
outputs negative signals
OFF: does not output negative signals
Used to set whether or not a synchronizing signal should
be superimposed on the green (G) channel of the video
signal output through the MONITOR output terminal.
OFF: Synchronizing signal not superimposed.
ON: Synchronizing signal superimposed.
6. Menu screen settings (continued)
SYSTEM SETTING screen (continued)
MEMO
• When set to FULL, the display of the image at the time of
FREEZE is delayed. Also, diagonal lines in the monitor
image may appear jagged.
• No matter which setting is selected, the resolution of the
actual recorded image remains unchanged at 1360
× 1024.
MEMO
• MENU RESET does not return this setting to default value.
• Even when this setting is set to OFF, the synchronizing
signal can be superimposed on the G channel by turning
ON the unit while the SET button is pressed. (Released
when the power is turned off.)
Default value
NARROW
0.7V
OFF
OFF
Menu item
MONITOR
AREA
BAR LEVEL
NEGA
SYNC ON G
MENU RESET
VIDEO MEMORY
CLEAR
TIME ADJUST
Initializes all menu screen settings other than the time and date and
SYNC ON G item.
Resetting settings (
੬ page 64)
Clears all images stored in the main unit memory.
Clearing all images from the memory (
੬ page 40)
Calls the time and date setting screen.
Setting the time and date (
੬ page 26)