JVC KY-F70B - Manual (Page 54)

E50
Function/variable range
Set depending on the used lens
AUTO:
when using an auto-iris lens
MANUAL: when using the auto-iris lens in MANUAL, us-
ing a manual iris lens, no lens or using the lens
remote control
Used to adjust the video level when using auto iris, ALC
and EEI.
Raise the level: increase the number
Lower the level: decrease the number
[Variable range: –128 ~ 127]
Used to set the iris level when the IRIS MODE is set to
MANUAL.
Open iris: increase the number
Close iris: decrease the number
[Variable range: 0 ~ 255]
6. Menu screen settings (continued)
About the submenu screens of the REC MENU
Menu item
IRIS MODE
AE LEVEL
IRIS LEVEL
Default value
AUTO
0
128
1 : EXPOSURE: ................. Used for video level related settings such as iris, shutter, sensitivity,
etc. (
੬ page 50)
2 : WHITE BALANCE: ........ Used to make settings for colour temperature, white balance, shad-
ing compensation, etc. (
੬ page 53)
3 : FREEZE: ....................... Used to set the cancel method when using the FREEZE function.
(
੬ page 55)
4 : PROCESS (1/3): ........... Used to set the detail compensation, gamma and master black.
(
੬ page 55)
(2/3): ........... Used to set the flare compensation and ABL (Auto Black Level), etc.
(3/3): ........... Used to set the colour matrix.
5 : SYSTEM SETTING: ...... Used when executing screen display, VGA mode switch and time
date setting. (
੬ page 59)
EXPOSURE screen
MEMO
”----“ is displayed when auto iris, ALC, and EEI are all set to
not work.