Maintenance analysis procedures, Factory defaults, Chapter 3 – McDATA 4300 User Manual
Page 65: Factory defaults -1, Factory-set defaults -1
Maintenance Analysis Procedures
3-1
3
Maintenance Analysis
Procedures
This chapter describes maintenance analysis procedures (MAPs) used
by service representatives to fault isolate Sphereon 4300 Fabric Switch
problems or failures to the field-replaceable unit (FRU) level. MAPs
consist of step-by-step procedures that provide information to
interpret system events, isolate a failure to a single FRU, remove and
replace the failed FRU, and verify product operation.
Factory Defaults
lists factory defaults for product passwords (customer and
maintenance level), and the product’s Internet Protocol (IP) address,
subnet mask, and gateway address.
Table 3-1
Factory-Set Defaults
Item
Default
Customer password
password
Maintenance password
level-2
IP address
10.1.1.10
Subnet mask
255.0.0.0
Gateway address
0.0.0.0