McDATA 4300 - Manual (Page 35)

Installation Tasks 2-1
2
Installation Tasks
This chapter describes tasks to install, configure, and verify operation
of the Sphereon 4300 Fabric Switch using the EFCM Basic Edition
interface. The product can be installed on a table top, mounted in a
Fabricenter equipment cabinet, or mounted in any standard 19-inch
equipment rack.
Factory Defaults
Table 2-1 lists factory-set defaults for the product.
Table 2-1 Factory-Set Defaults (Product)
Item Default
EFCM Basic Edition interface user name (case sensitive) Administrator
EFCM Basic Edition interface password (case sensitive) password
Customer-level password (maintenance port access) password
Maintenance-level password (maintenance port access) level-2
IP address 10.1.1.10
Subnet mask 255.0.0.0
Gateway address 0.0.0.0