McDATA 4300 User Manual
Page 12
xii
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Preface
- This chapter describes
supplementary diagnostic and repair procedures for a failed
switch. The chapter includes procedures to display and use log
information, perform port diagnostics, manage configuration
data, collect maintenance data, power-on, power-off, and reset
the switch, set the switch online or offline, block ports, manage
switch firmware, clean fiber optics, and install or upgrade
management server software.
Removal and Replacement Procedures
- This chapter
describes procedures to remove and replace switch FRUs.
- This chapter illustrates,
describes, and shows the location of switch FRUs. In addition,
switch FRUs are cross-referenced to corresponding part numbers.
- This appendix provides an
explanation of event codes that appear at the EFCM Basic Edition
interface. The event severity and a recommended course of action
in response to each event are also provided.
An
is also provided.
Related Publications
Other publications that provide additional information about the
switch include:
•
McDATA Products in a SAN Environment - Planning Manual
(626-000124).
•
McDATA EFCM Basic Edition User Manual (620-000240).
•
McDATA SNMP Support Manual (620-000131).
•
McDATA E/OS Command Line Interface User Manual (620-000134).
•
McDATA Sphereon 4300, 4500, and 4700 Switch Rack-Mount Kit
Installation Instructions (958-000316).
•
McDATA FC-512 Fabricenter Equipment Cabinet Installation and
Service Manual (620-000100).
Ordering Printed
Manuals
To order a printed copy of this publication, submit a purchase order
as described in Ordering McDATA Documentation Instructions at
http://www.mcdata.com
. To obtain documentation CD-ROMs,
contact your McDATA sales representative.