Motorola MC68VZ328 - Manual (Page 301)

Programming Model
In-Circuit Emulation 16-9
CEN
Bit 0 Compare Enable—This bit is used to activate the compari-
son logic. It is recommended that the address compare and
mask registers be programmed before setting this bit to valid. 0 = Disable the breakpoint
comparison logic.
1 = Enable the breakpoint
comparison logic.
Table 16-5. Emulation Mode Hard Coded Memory Locations
Address Hard Code
0x0 0xFFFC
0x2 0xFFFC
0x4 0xFFFC
0x6 0x0020
0x28 0xFFFC
0x2A 0x0010
(IRQ7 vector upper word) 0xFFFC
(IRQ7 vector lower word) 0x0010
Table 16-4. ICE Module Control Register Description (Continued)
Name Description Setting