Motorola 2200 - Manual (Page 9)

9
Important Safety Instructions
POWER SUPPLY INSTALLATION
Connect the power supply cord to the power jack on the Motorola Netopia
®
Gateway. Plug the power
supply into an appropriate electrical outlet.
☛
CAUTION:
Depending on the power supply provided with the product, either the direct plug-in power
supply blades, power supply cord plug or the appliance coupler ser ves as the mains power
disconnect. It is impor tant that the direct plug-in power supply, socket-outlet or appliance
coupler be located so it is readily accessible.
(Sweden) Apparaten skall anslutas till jordat uttag när den ansluts till ett nätverk
(Norway) Apparatet må kun tilkoples jordet stikkontakt.
USB-powered models: For Use with Listed I.T.E. Only
TELECOMMUNICATION INSTALLATION
When using your telephone equipment, basic safety precautions should always be followed to reduce
the risk of fire, electric shock and injur y to persons, including the following:
❑ Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry
tub, in a wet basement or near a swimming pool.
❑ Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a
remote risk of electrical shock from lightning.
❑ Do not use the telephone to report a gas leak in the vicinity of the leak.
❑
CAUTION: The external phone should be UL Listed and the connections should be made in accor-
dance with Article 800 of the NEC.
PRODUCT VENTILATION
The Motorola Netopia
®
Gateway is intended for use in a consumer's home. Ambient temperatures
around this product should not exceed 104°F (40°C). It should not be used in locations exposed to out-
side heat radiation or trapping of its own heat. The product should have at least one inch of clearance
on all sides except the bottom when properly installed and should not be placed inside tightly enclosed
spaces unless proper ventilation is provided.
SAVE THESE INSTRUCTIONS