Description, Power requirements, Environment – Motorola 2200 User Manual
Page 247: Software and protocols, Chapter 6
245
CHAPTER 6
Technical Specifications and Safety
Information
Description
Communications interfaces:
The Motorola Netopia® Gateways have an RJ-11 jack for DSL line connections
or an RJ-45 jack for cable/DSL modem connections and 1 or 4–por t 10/100Base-T Ethernet switch for your LAN
connections. Some models have a USB por t that can be used to connect to your PC; in some cases, the USB por t
also ser ves as the power source. Some models contain an 802.11b or 802.11g wireless LAN transmitter.
Power requirements
●
12 VDC input
Environment
Operating temperature:
0° to +40° C
Storage temperature:
0° to +70° C
Relative storage humidity:
20 to 80% noncondensing
Software and protocols
Software media:
Software preloaded on internal flash memor y; field upgrades done via download to internal
flash memor y via TFTP or web upload.
Routing:
TCP/IP Internet Protocol Suite, RIP
WAN support:
PPPoE, DHCP, static IP address
Security:
PAP, CHAP, UI password security, IPsec, Secure Sockets Layer (SSL) cer tificate (suppor ted models)
Management/configuration methods:
HTTP (Web ser ver), Telnet, SNMP, TR-069
DSL Forum CPE WAN
Management Protocol
Diagnostics:
Ping, event logging, routing table displays, statistics counters, web-based management,
traceroute, nslookup, and diagnostic commands.