Motorola 2200 - Manual (Page 136)

Administrator’s Handbook
136
reset atm
Resets the Asynchronous Transfer Mode (ATM) statistics.
reset cdmode
This command will set up one boot flag so that the next time a 3342N/3352N restar ts or reboots
(power cycle), the Gateway will boot into CD-ROM mode instead of Gateway mode.
This command is only for the 3342N/3352N. If the Gateway is not a 3342N/3352N this command
does nothing but returns the message: “CD mode is not suppor ted on this platform.”
reset crash
Clears crash-dump information, which identifies the contents of the Motorola Netopia® Gateway regis-
ters at the point of system malfunction.
reset dhcp server
Clears the DHCP lease table in the Motorola Netopia® Gateway.
reset diffserv
Resets the Differentiated Ser vices (diffser v) statistics.
reset enet [ all ]
Resets Ethernet statistics to zero. Resets individual LAN switch por t statistics as well as wireless and
WAN Ethernet statistics (where applicable).
reset heartbeat
Restar ts the hear tbeat sequence.
reset ipmap
Clears the IPMap table (NAT).
reset log
Rewinds the diagnostic log display to the top of the existing Motorola Netopia® Gateway diagnostic log.
The
reset log command does not clear the diagnostic log. The next show log command will display
information from the beginning of the log file.
reset security-log
Clears the security monitoring log to make room to capture new entries.