Wireless, Enable wireless, Wireless id (ssid) – Motorola 2200 User Manual
Page 28: Enable wireless protected setup (wps)
Administrator’s Handbook
28
Wireless
(supported models)
When you click
Wireless
, the 3-D Reach
Wireless configuration page appears.
Enable Wireless
The wireless function is automatically enabled by default. If you uncheck the
Enable Wireless check-
box, the Wireless Options are disabled, and the Gateway will not provide or broadcast its wireless LAN
ser vices.
Wireless ID (SSID)
The Wireless ID is preset to a number unique to your unit. You can either leave it as is, or change it by
entering a freeform name of up to 32 characters, for example “Hercule’s Wireless LAN”. On client PCs’
software, this might also be called the Network Name. The Wireless ID is used to identify this par ticular
wireless LAN. Depending on their operating system or client wireless card, users must either:
❑ select from a list of available wireless LANs that appear in a scanned list on their client
❑ or enter this name on their clients in order to join this wireless LAN.
Enable Wireless Protected Setup (WPS)
See