Motorola 2200 User Manual
Page 197
197
set security ipsec tunnels name "123" IKE-mode
isakmp-SA-encrypt { DES | 3DES }
for details about SafeHarbour IPsec tunnel capability.
set security ipsec tunnels name "123" IKE-mode ipsec-mtu
mtu_value
The Maximum Transmission Unit is a link layer restriction on the maximum number of bytes of data in a
single transmission. The maximum allowable value (also the default) is 1500, and the minimum is 100.
set security ipsec tunnels name "123" IKE-mode isakmp-SA-hash
{ MD5 | SHA1 }
for details about SafeHarbour IPsec tunnel capability.
set security ipsec tunnels name "123" IKE-mode PFS-enable { off | on }
for details about SafeHarbour IPsec tunnel capability.
set security ipsec tunnels name "123" IKE-mode invalid-spi-recovery
{ off | on }
Enables the Gateway to re-establish the tunnel if either the Motorola Netopia® Gateway or the peer
gateway is rebooted.
set security ipsec tunnels name "123" xauth enable {off | on }
Enables or disables Xauth extensions to IPsec, when
IKE-mode neg-method is set to aggressive.
Default is
off.
set security ipsec tunnels name "123" xauth username
username
Sets the Xauth username, if Xauth is enabled.
set security ipsec tunnels name "123" xauth password
password
Sets the Xauth password, if Xauth is enabled.
set security ipsec tunnels name "123" nat-enable { on | off }
Enables or disables NAT on the specified IPsec tunnel. The default is
off.
set security ipsec tunnels name "123" nat-pat-address
ip-address
Specifies the NAT por t address translation IP address for the specified IPsec tunnel.