Motorola 2200 - Manual (Page 87)

87
When you are finished entering the required information, click the Submit button.
To configure the second voice por t, return to the VoIP SIP Lines screen.
When you are finished, you will be prompted to restar t your router.
Digit Map A set of rules used to recognize a number dialed by the user and to
ensure this number matches the dial plan defined by the ITSP.
Call Features Settings
DTMF Mode Choose the Dual Tone Multi-Frequency Mode:
• Inband: Sends the DTMF digits as a normal inband tone.
• RFC2833: Sends the DTMF digits as an event as part of the RTP
packet header information.
• Info: Sends the DTMF digits in the SIP INFO message.
Enable Call Forwarding
Unconditionally If you check this checkbox, all calls will be for warded to a specified
number.
The Unconditional Call Forwarding Number field will appear for you
to enter the number, if enabled.
Enable Call Forwarding On
Busy If you check this checkbox, calls will be for warded to a specified num-
ber if the line is busy.
The On Busy Call Forwarding Number field will appear for you to
enter the number, if enabled.
Enable Call Forwarding On
No Answer If you check this checkbox, calls will be for warded to a specified num-
ber if there is no answer.
The On No Answer Call Forwarding Number field will appear for
you to enter the number, if enabled.
Enable Call Waiting If you check this checkbox, call waiting is enabled.
Enable Conferencing If you check this checkbox, 3-par ty teleconferencing is enabled.
Enable Do Not Disturb If you check this checkbox, the Gateway will reject VoIP calls without
ringing the phone.
Subscribe for MWI If you check this checkbox, Message Waiting Indicator is enabled
when new voice mail is received.
Enable Call Transfer If you check this checkbox, Call Transferring is enabled when an
incoming call is received.
SIP Line Entry