Motorola 2200 - Manual (Page 143)

143
namePtr : ethernet0/3
portType : 3
portIndex : 5
ifId : 93
show voip
Shows voice over IP information.
show wireless [ all ]
Shows wireless status and statistics.
show wireless clients [ MAC_address ]
Displays details on connected clients, or more details on a par ticular client if the MAC address is
added as an argument.
voip rtpstats
Allows printing RTP Send and Receive statistics.
telnet [ hostname | ip_address ] [ port ]
Lets you open a telnet connection to the specified host through your Motorola Netopia® Gateway.
❑ The hostname argument is the name of the device to which you want to connect; for example, tel-
net ftp.netopia.com .
❑ The ip_address argument is the IP address, in dotted decimal notation, of the device to which you
want to connect.
❑ The port argument is the number of t he port over which you want to open a telnet session.
traceroute ( ip_address | hostname )
Traces the routing path to an IP destination.
upload [ server_address ] [ filename ] [confirm]
Copies the current configuration settings of the Motorola Netopia® Gateway to a TFTP (Trivial File Trans-
fer Protocol) ser ver. The TFTP ser ver must be accessible on your Ethernet network. The
server_address
argument identifies the IP address of the TFTP ser ver on which you want to store
the Motorola Netopia® Gateway settings. The filename argument identifies the path and name of
the configuration file on the TFTP ser ver. If you include the optional
confirm keyword, you will not be
prompted to confirm whether or not you want to per form the operation.
view config
Dumps the Motorola Netopia
®
Gateway’s configuration just as the view command does in config
mode.