Motorola 2200 - Manual (Page 208)

Administrator’s Handbook
208
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
dst-compare [ nc | ne | lt | le | eq | gt | ge ]
Sets the destination compare operator action for the specified filter rule. dst-compare only displays
when the protocol is TCP or UDP.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
src-port value
Specifies the source IP por t to match packets (the por t on the sending host that originated the packet,
if the underlying protocol is TCP or UDP).
src-port does not display if nc is set for src-compare or dst-
compare.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
dst-port value
Specifies the destination IP por t to match packets (the por t on the receiving host that the packet is
destined for, if the underlying protocol is TCP or UDP).
dst-port does not display if nc is set for src-
compare or dst-compare.
set security pkt-filter interface
assigned-filterset filterset-name
Associates a filterset with a LAN or WAN inter face.
Example:
set security pkt-filter ethernet A assigned-filterset set1
Operator Action
nc No compare
ne Not equal to
lt Less than
le Less than or equal to
eq Equal to
ge Greater than or equal to
gt Greater than