Vlan settings – Motorola 2200 User Manual
Page 224
Administrator’s Handbook
224
VLAN Settings
You can create up to 8 VLANs, and you can also restrict any VLAN, and the computers on it, from admin-
istering the Gateway. See
for more information.
set vlan name
name
Sets the descriptive name for the VLAN. If no name is specified, displays a selection list of node names
to select for editing. Once a new VLAN name is specified, presents the list of VLAN characteristics to
define.
set vlan name
name
type [ by-port | global ]
Specifies VLAN
type: by-port or global. Default is by-port.
set vlan name
name
id
VID
Specifies VLAN
id (VID), when type is set to global. The numerical range of possible VIDs is 1 - 4094.
(A VID of zero (0) is permitted on the Ethernet WAN por t only.)
set vlan name
name
admin-restricted [ off | on ]
Turns
admin-restricted off or on. Default is off. If you select on, administrative access to the Gate-
way is blocked from the specified VLAN.
set vlan name
name
seg-pbits [ 0 - 7 ]
Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this VLAN with
unmarked priority bits (pbits) will be re-marked to this priority.
set vlan name
name
ports
port
option [ off | on ]
Enables or disables the Gateway’s physical Ethernet, USB or VCC
port or wireless SSID for the speci-
fied VLAN.
set vlan name
name
ports
port
tag [ off | on ]
If set to
on, packets transmitted from this port through this VLAN must be tagged with the VLAN VID.
Packets received through this por t destined for this VLAN must be tagged with the VLAN VID by the
source. The
tag option is only available on global type ports.
set vlan name
name
ports
port
priority [ off | on ]
Enables or disables the
priority for the port assigned to the specified VLAN allowing packet prioritiza-
tion based on any 802.1p priority bits in the VLAN header to prioritize packets within the Gateway’s
internal queues, according to DiffSer v priority mapping rules.
set vlan name
name
ports
port
promote [ off | on ]
Enables or disables the
promote setting allowing writing any 802.1p priority bits into the IP-TOS header
bit field for received IP packets on this por t destined for this VLAN. Write any IP-TOS priority bits into the