Motorola 2200 - Manual (Page 205)

205
Sets the exposed list address number.
set security state-insp xposed-addr exposed-address# " n " start-ip ip_address
Sets the exposed list range star ting IP address, in dotted quad format.
set security state-insp xposed-addr exposed-address# " n " end-ip ip_address
Sets the exposed list range ending IP address, in dotted quad format.
32 exposed addresses can be created. The range for exposed address numbers are from 1 through 32.
set security state-insp xposed-addr exposed-address# " n "
protocol [ tcp | udp | both | any ]
Sets the protocol for the stateful inspection feature for the exposed address list. Accepted values for
protocol are tcp, udp, both, or any.
If protocol is not any, you can set por t ranges:
set security state-insp xposed-addr exposed-address# " n "
start-port [ 1 - 65535 ]
set security state-insp xposed-addr exposed-address# " n "
end-port [ 1 - 65535 ]