FARGO electronic DTC300 User Manual
Page 382
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
11-13
Selecting the Mechanics tab in the Diagnostics Utility
Step Procedure
1
a. Select the Mechanics tab to test Motors and Sensors in the Printer. (Note:
This section has a procedure for each function by a Run button, as shown
below.)
b. See the entire Selecting the Mechanics tab in the Diagnostics Utility
section for related sub-procedures (Steps 2A to 2G).