Resolving the excessive resin printing problems – FARGO electronic DTC300 User Manual
Page 120
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
5-47
Resolving the Excessive Resin Printing problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1
Review the following information.
•
Symptom: Black resin text and barcodes appear smeared or too thick.
•
Printer Error State: None
•
LCD Error Display: None
•
Driver Monitor Error Display: None
2
Reduce the Resin Heat setting within the Image Color tab of the Printer Driver.
See the
Using the Image Color tab (DTC400/DTC300)
.