FARGO electronic DTC300 User Manual
Page 289
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
8-35
Replacing the Printhead Access Cover (D900029)
Refer to Drawings D900148.
Tools Needed: Phillips Head Screwdriver.
Parts Needed: Printhead Access Cover D900029
Estimated Repair Time: 5 minutes.
Steps Procedure
1
Caution: Turn off the Printer and unplug the power cord from the
Printer.
2
Turn the Printer over and remove the one (1) thumb screw (130883) from the
Printhead Access Cover (D900029).
3
Remove the Printhead Access Cover.
4
Replace the Access Cover (D900029).
Continued on the next page
See upper middle left of this photo.