Using the print back side only option – FARGO electronic DTC300 User Manual
Page 167
![background image](/manuals/105140/167/background.png)
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
6-38
Using the Print Back Side Only option
Use this option to print only onto the backside of cards.
Step Procedure
1
Select this option to print only onto the backside of preprinted cards that must
have their Magnetic Stripe or smart card chip encoded. (Note: Load the cards in
the standard manner.)
•
When this option is selected, the Print Both Sides option is automatically
disabled.)
•
When attempting to print a two-page document (if Print Back Side Only is
selected), the first page of the document will print on the backside of the
card.
•
The second page of the document will then be printed on the back of a
second card.