FARGO electronic DTC300 - Manual (Page 118)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 5-45
Resolving Ribbon Wrinkle problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: Printed cards have off-colored lines or streaks on them.
• Printer Error State: None
• LCD Error Display: None
• Driver Monitor Error Display: None
2 Confirm that the Printer is using the most current Driver via:
http://www.fargo.com
3 Reduce the Dye-Sub Intensity setting within the Image Color tab of the Printer
Driver. See the
Using the Image Color tab (DTC400/DTC300) .