FARGO electronic DTC300 User Manual
Page 291
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
8-37
Replacing the Magnetic Module Door (D900107)
Refer to Drawings D900148.
Tools Needed: Phillips Head Screwdriver.
Parts Needed: Magnetic Module Door D900107
Estimated Repair Time: 5 minutes.
Steps Procedure
1
Caution: Turn off the Printer and unplug the power cord from the
Printer.
2
Use a No. 2 Phillips screwdriver to remove the one (1) screw (180948) to the
Magnetic Door (D9000107).
3
Replace the Magnetic Door (D9000107).
Continued on the next page