FARGO electronic DTC300 - Manual (Page 356)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 8-102
Replacing the Printhead Cable Assembly (D900035)
Refer to Drawings D900023 and D900110.
Tools Needed: Phillips Head Screwdriver.
Parts Needed: Printhead Cable D900035
Estimated Repair Time: 30 minutes.
Steps Procedure
1
Caution: Turn off the Printer and unplug the power cord from the
Printer.
2 Remove the Rear Cover. See Replacing the Rear Cover (D900066) .
3 Turn the Printer over.
4 Unscrew the one (1) thumbscrews (130887) that secures the Print Head Cover
Plate to the Baseplate.
5 Remove the Head Cover Plate (820253).
6 Remove the Printhead. See Replacing the Printhead Assembly (D900023) .
7 Disconnect the Printhead Data Cable (D900035) from the Printhead (D900023)
Continued on the next page