FARGO electronic DTC300 - Manual (Page 363)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3) 8-109
Replacing the Stepper Motor Idler Pulley Shaft Assembly (D900089) and the
Stepper Motor Drive Belt (F000094) (continued)
Steps Procedure
7 Use a Torx T-10 screwdriver to remove the Stepper Motor Idler set screw.
8 Remove the Stepper Motor Drive Belt (F00094)
9 Remove the Stepper Motor Idler Pulley.