FARGO electronic DTC300 User Manual
Page 338
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
8-84
Replacing the Headlift Sensor Assembly (D900113) (continued)
Steps Procedure
7
Use a Needle Nose Pliers to firmly grasp the Headlift Sensor and pull to remove
it. (Note: The Headlift Sensor is a “pressure-fit” Sensor and does not rely on any
screws to fasten it to the Printer.)
8
Replace the Sensor.
9
Reverse to reassemble.