FUJITSU PRIMERGY RX900 S1 - Manual (Page 39)

RX900 S1 Maintenance Manual 39
Basic procedures
4.1.2 Locate the faulty component by PRIMERGY
diagnostics indicators
If the system has been powered off to replace a non-hot-plug unit, a system of
PRIMERGY diagnostics indicators guides you to the faulty component.
For the RX900 S1, it is possible to turn on the local diagnostics indicators for
40 s even if AC power is lost for 24 hours.
For more information see the "ServerView Suite Local Service Concept - LSC"
manual and the "Customer Self Service (CSS)" manual on the ServerView Suite
DVD 2.
Figure 3: CSS button on the PCI Riser
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for
integral server components. Ask you local Fujitsu service center for
more detailed information.
V
CAUTION!
Procedures indicated as "Authorized personnel only“ must be
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.